DRAFT
TM 5-4210-249-13&P-4
0596
INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
1.
Apply sealing compound to two plugs (15) and (16) and fitting (2).
2.
Install two plugs (16) and (15) on hydraulic reservoir (8).
3.
Install two rubber grommets (14) and screws (13) on hydraulic reservoir (8).
4.
Install fitting (2) on hydraulic reservoir (12).
5.
Position hydraulic reservoir (8) in vehicle.
6.
Install two rubber grommets (12) and brackets (7) on hydraulic reservoir (8) with two washers (11),
lockwashers (10), and screws (9).
NOTE
Install screws in same position as noted prior to removal.
7.
Install two brackets (7) on vehicle with two screws (6), four washers (5), two lockwashers (4), and nuts (3).
8.
Close hose bed cover (WP 0015).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0596-3
