DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
CONTROL VALVE REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 48
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Wheels chocked (TM 9-2320-347-10)
Tags, Identification (WP 0625, Item 51)
Batteries disconnected (TM 9-2320-325-14&P)
Ties, Cable, Plastic (WP 0625, Item 58)
Pump house panel S removed (WP 0540)
Preformed Packing (1)
Air system drained (TM 9-2320-347-10)
Preformed Packing (3)
REMOVAL
TFFT1237
NOTE
Remove cable ties as required.
Tag and mark wires prior to removal to ensure proper installation.
All control valves are removed the same way. Ground sweeps "B" # 3 shown.
1.
Disconnect connector (1).
2.
Remove two screws (2), washers (3), valve (4), preformed packing (5), and three preformed packings (6) from
manifold (7). Discard preformed packings.
END OF TASK
0375-1