DRAFT
TM 5-4210-249-13&P-3
0376
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01186
18. Remove drum (46) from axle assembly (35).
19. Remove bearing (34) and axle assembly (35) from disc (47).
NOTE
Note position of locknuts prior to removal to ensure proper installation.
20. Remove two locknuts (48) and disc (47) from two screws (43). Discard locknuts.
END OF TASK
ASSEMBLY
NOTE
Install locknuts as noted prior to removal.
1.
Install rear disc (47) and two locknuts (48) on two screws (43).
2.
Install axle assembly (35) and bearing (34) on disc (47).
3.
Install drum (46) on axle assembly (35).
NOTE
Perform Step (7) if washer was removed.
4.
Install washer (45) on disc (40) with six rivets (44).
5.
Install disc (40) on axle assembly (35) and two screws (43) with locknuts (42).
6.
Install spacer (41) on axle assembly (35).
0376-4