DRAFT
TM 5-4210-249-13&P-3
0320
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02024B
4.
Remove eight locknuts (14), washers (15), screws (16), hinge (13), and plate (17) from pump operator's panel
cover B (18). Discard locknuts.
NOTE
Both rubber hold-downs are removed the same way.
5.
Remove locknut (19), washer (20), screw (21), and rubber hold-down (22) from pump operator's panel
cover B (18). Discard locknut.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02024C
6.
Remove four locknuts (23), washers (24), screws (25), and handle (26) from pump operator's panel
cover B (18). Discard locknuts.
7.
Remove two seals (27) from pump operator's panel cover B (18).
8.
Remove three seals (28) from cover A (9).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
9.
Clean seal residue from two pump operator's panel covers A (9) and B (18).
0320-2