DRAFT
TM 5-4210-249-13&P-3
0301
TIMER REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01665
NOTE
Tag and mark wires prior to removal to ensure proper installation.
1.
Loosen four screws (1) and remove four wires (2) from timer (3).
NOTE
Timer is secured on mounting strip with spring loaded lock tab located on bottom portion of
timer. Flat blade screwdriver inserted between lock tab and timer and pulling lock tab
down will allow timer to be released from mounting strip.
2.
Remove timer (3) from mounting strip (4).
3.
Loosen screw (5) and remove wire (6) from timer (3).
END OF TASK
TIMER INSTALLATION
1.
Install wire (6) on timer (3) and tighten screw (5).
NOTE
Timer is installed on mounting strip by snapping timer into place.
2.
Install timer (3) on mounting strip (4).
3.
Install four wires (2) on timer (3) and tighten four screws (1).
END OF TASK
0301-5