DRAFT
TM 5-4210-249-13&P-2
0267
INSTALLATION
1.
Install bracket (13) on pipe (37) with two U-bolts (36), cradles (35), and four locknuts (34).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
CAUTION
Use sealing compound sparingly only on pipe threads. Do not apply compound to
hose connections. Damage to equipment may result.
2.
Apply sealing compound to threads of fitting (33), nipple (32), and three elbows (18), (20), and (22).
3.
Install fitting (33), nipple (32), and elbow (20) on tee (31).
4.
Install elbow (22) on fitting (33).
5.
Install nipple (32) and tee (31) on primer valve (26).
6.
Install elbow (18) on primer valve (26).
7.
Install primer valve (26) and cable (28) on bracket (13) with U-bolt (30), cradle (29), and two locknuts (27). Do
not tighten locknuts.
8.
Install U-bolt (25) on primer valve (26) and bracket (13) with cradle (24) and two locknuts (23).
9.
Tighten two locknuts (27).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
10. Apply electrical sealant on end of cable (28).
0267-4