DRAFT
TM 5-4210-249-13&P-2
0267
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 72
Care must be taken when installing wire on arm and bracket. Wire is under tension
and must be held until safely repositioned. Failure to comply may result in injury to
personnel.
NOTE
Install cable as noted prior to removal.
Ensure primer handle is in closed position (pushed down) and primer valve lever is
forward prior to installing cable on bracket.
16. Install cable (12) on bracket (13) with two cushion clips (11), screws (10), four washers (9), two
lockwashers (8), and nuts (7).
17. Install retainer (6) on cable wire (4) and tighten screw (5).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00268
CAUTION
Cable wire must be bent a minimum of 90 degrees. Failure to comply may allow
retainer to come loose and not allow primer cable to function.
18. Bend cable wire (4).
19. Install wire (2) on stud (3) with nut (1).
0267-6