DRAFT
TM 5-4210-249-13&P-2
0266
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04150
2.
Install wire 4066 (13) on driver side inlet prime valve solenoid (4) with lockwasher (12) and nut (11).
3.
Install wire 1640 (10) on driver side inlet prime valve solenoid (4) with lockwasher (9) and nut (8).
4.
Install wire 2788 (7) on driver side inlet prime valve solenoid (4) with lockwasher (6) and nut (5).
5.
Install jumperwire 2768 (3) on driver side inlet prime valve solenoid (4) with lockwasher (2) and nut (1).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
6.
Apply sealing compound to electrical connections at wire 4066 (13), wire 1640 (10), wire 2788 (7), and
jumperwire 2768 (3).
END OF TASK
FOLLOW-ON MAINTENANCE
Close pump house panel A (WP 0539).
END OF TASK
END OF WORK PACKAGE
0266-5/(6 blank)
