DRAFT
TM 5-4210-249-13&P-2
0266
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
6.
Apply sealing compound to electrical connections at wire 4064 (14), wire 1640 (11), wire1590 (8), and
jumperwire 2768 (3).
END OF TASK
DRIVER SIDE INLET PRIME VALVE SOLENOID REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04150
1.
Remove nut (1), lockwasher (2), and jumperwire 2768 (3) from driver side inlet prime valve solenoid (4).
Discard lockwasher.
2.
Remove nut (5), lockwasher (6), and wire 2788 (7) from driver side inlet prime valve solenoid (4). Discard
lockwasher.
3.
Remove nut (8), lockwasher (9), and wire 1640 (10) from driver side inlet prime valve solenoid (4). Discard
lockwasher.
4.
Remove nut (11), lockwasher (12), wire 4066 (13) from driver side inlet prime valve solenoid (4). Discard
lockwasher.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0266-3