DRAFT
TM 5-4210-249-13&P-2
0265
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT1065A
NOTE
Note position of cable on bracket prior to removal to ensure proper installation.
3.
Remove two nuts (4), lockwashers (5), four washers (6), two screws (7), cushion clips (8), and cable (9) from
bracket (10). Discard lockwashers.
4.
Remove cable wire (1) from pin (11).
NOTE
Note routing of cable in pump house prior to removal to ensure proper installation.
Remove cable ties as required.
5.
Remove cable (9) from vehicle.
END OF TASK
INSTALLATION
NOTE
Route cable in pump house as noted prior to removal.
Install cable ties as required.
1.
Position cable (9) on vehicle.
2.
Install cable wire (1) through pin (11).
3.
Install cable (9) on bracket (10) with two cushion clips (8), screws (7), four washers (6), two lockwashers (5),
and nuts (4). Do not tighten screws.
0265-2