DRAFT
TM 5-4210-249-13&P-2
0224
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00903
3.
Loosen three screws (7), (8), and (9) slightly to allow alternator (10) to pivot.
4.
Using square wrench in bracket hole (11), move alternator (10) to release tension on alternator drive belt (12).
5.
Remove alternator drive belt (12) from two pulleys (13) and (14).
INSTALLATION/ADJUSTMENT
NOTE
Install belts as noted prior to removal.
1.
Install alternator drive belt (12) on two pulleys (13) and (14).
2.
Using square wrench in bracket hole (11), move alternator (10) to tighten alternator drive belt (12) to 101 lb-ft
(450 Nm), as indicated by belt tensioner gauge.
3.
Tighten three alternator bracket screws (7), (8), and (9).
0224-2
