DRAFT
TM 5-4210-249-13&P-2
0223
2.
Install screw (21) and nut (22) on alternator (15) and adjustment bracket (18).
3.
Install alternator drive belt (19) on pulley (20) and adjust tension (WP 0224).
4.
Secure alternator (15) and adjusting bracket (18) with nut (22) and screw (21).
5.
Tighten screws (17) and (16).
6.
Connect connector (14) to alternator (15).
7.
Install ring terminal (12) on stud (13) with nut (11).
8.
Install ring terminal (10) on stud (8) with nut (9).
9.
Push rubber boot (7) over stud (8).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00622
10. Install hose (4) on charge air cooler (5) and intake tubing (6) with two hose clamps (3).
11. Install ducting (2) on charge air ducts with two clamps (1).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect batteries (TM 9-2320-325-14&P)
2.
Install crew cab access panel (right side) (WP 0501)
3.
Install pump house panel U (WP 0540)
END OF TASK
END OF WORK PACKAGE
0223-3/(4 blank)