DRAFT
TM 5-4210-249-13&P-2
0171
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04537
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 25.
With HIGH IDLE switch in ON position (WP 0004). Check for 22 to 28 VDC at HIGH
IDLE ENGAGED indicator black wire terminal to a known good ground.
If 22 to 28 VDC are not present, replace HIGH IDLE ENGAGED
indicator (WP 0310).
Step 26.
Put HIGH IDLE switch to OFF position (WP 0004). Turn ENGINE switch to OFF
position (TM 9-2320-347-10). Check for continuity across HIGH IDLE ENGAGED
indicator.
a.
If continuity is present, repair ground wire if repairable
(TM 9-2320-325-14&P).
b.
If continuity is not present, replace HIGH IDLE ENGAGED
indicator (WP 0310).
0171-13