DRAFT
TM 5-4210-249-13&P-2
0171
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04536
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 30.
Turn hydraulic generator off (WP 0021). Turn vehicle ENGINE switch to OFF position
(TM 9-2320-347-10). Turn battery disconnect switch to OFF position (WP 0007). Open
hydraulic generator digital display. Disconnect passenger side body wire harness
hydraulic generator digital display 3-terminal wire harness connector. Turn battery
disconnect switch to ON position (WP 0007). Start vehicle engine (TM 9-2320-347-10).
With a test lead set, check for 22 to 28 VDC at wire 2852 (red) in passenger side body
wire harness hydraulic generator digital 3-terminal connector, terminal A to a known
good ground.
If 22 to 28 is not present, go to Step 33.
0171-16
