DRAFT
TM 5-4210-249-13&P-2
0168
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04285
Step 13.
Turn Off Clearance Lights (TM 9-2320-347-10). Turn Service Drive Lights
Off (TM 9-2320-347-10). Turn battery disconnect switch to OFF position (WP 0007).
Open passenger side top stowage hatch T1 (WP 0010). Cut wire 1606 (green) at non-
operating clearance light. Turn battery disconnect switch to ON position (WP 0007).
Turn Service Drive Lights On (TM 9-2320-347-10). Turn On Clearance Lights
(TM 9-2320-347-10). Check for 22 to 28 VDC between wire 1606 (green) and a known
good ground.
If 22 to 28 VDC are not present, repair wire 1606 in passenger side body
wire harness if repairable (TM 9-2320-325-14&P), or replace passenger
side body wire harness (WP 0456).
Step 14.
Turn Off Clearance Lamps (TM 9-2320-347-10). Turn Service Drive Lights Off
(TM 9-2320-347-10). Turn battery disconnect switch to OFF position (WP 0007). Cut
wire 2740 (black) at non-operating clearance light. Check for continuity across wire
2740 (black) and a known good ground.
a.
If there is continuity, replace non-operating clearance light (WP 0349).
b.
If there is no continuity, repair wire 2740 in passenger side body wire
harness if repairable (TM 9-2320-325-14&P), or replace passenger
side body wire harness (WP 0456).
Step 15.
Turn Off Clearance Lights (TM 9-2320-347-10). Turn Service Drive Lights
Off (TM 9-2320-347-10). Turn battery disconnect switch to OFF position (WP 0007).
Open passenger side top stowage hatch T1 (WP 0010). Cut wire 1606 (black) at
non-operating clearance marker. Turn battery disconnect switch to ON position
(WP 0007). Turn Service Drive Lights On (TM 9-2320-347-10). Turn On Clearance
Lights (TM 9-2320-347-10). Check for 22 to 28 VDC between wire 1606 (green) and a
know good ground.
If 22 to 28 VDC are present, go to Step 17.
0168-8
