DRAFT
TM 5-4210-249-13&P-2
0168
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04557
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 8.
Turn Off Clearance Lights (TM 9-2320-347-10). Turn Service Drive Lights
Off (TM 9-2320-347-10). Turn battery disconnect switch to OFF position (WP 0007).
Remove light bezel cover (WP 0397). Cut wire 1606 (green) at non-operating
clearance light. Turn battery disconnect switch to ON position (WP 0007). Turn Service
Drive Lights On (TM 9-2320-347-10). Turn On Clearance Lights (TM 9-2320-347-10).
Check for 22 to 24 VDC between wire 1606 (green) at driver side body wire harness
and a known good ground.
If 22 to 28 VDC are not present, go to Step 10.
0168-5