DRAFT
TM 5-4210-249-13&P-2
0168
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 10.
Turn Off Clearance Lights (TM 9-2320-347-10). Turn Service Drive Lights
Off (TM 9-2320-347-10). Turn battery disconnect switch to OFF position (WP 0007).
Disconnect main wire harness driver side body wire harness connector. Turn battery
disconnect switch to ON position (WP 0007). Turn Service Drive Lights
On (TM 9-2320-347-10). Turn On Clearance Lights (TM 9-2320-347-10). With a test
lead set, check for 22 to 28 VDC between wire 1606 (green) at main wire harness driver
side body wire harness connector, terminal 11 and a known good ground.
a.
If 22 to 28 VDC are present, repair wire 1606 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0448).
b.
If 22 to 28 VDC are not present, repair wire 1606 in main wire harness
if repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0455).
Step 11.
Check if non-operating clearance lights are located on passenger side of body.
If non-operating clearance light is not located on passenger side, go to
Step 18.
Step 12.
Check if at least one passenger side clearance light operates.
If both passenger side clearance lights do not operate, go to Step 15.
0168-7
