DRAFT
TM 5-4210-249-13&P-2
0168
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04289
Step 22.
Install fuse FS 19 (WP 0401). Remove relay 14 (WP 0402). Remove one rear lower
center clearance light (WP 0342). With a test lead set, check for continuity across wire
1606 (green) from cab power distribution block relay 14 connector, terminal 5 to rear
lower center clearance light connector terminal.
If there is no continuity, go to Step 27.
Step 23.
With a test lead set, check for continuity across wire 1640 (black) from cab power
distribution block relay 14 connector, terminal 2 to a known good ground.
If there is no continuity, replace cab power distribution wire harness and
block (WP 0441).
0168-13