DRAFT
TM 5-4210-249-13&P-2
0168
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04283
Step 6.
Remove light bezel cover (WP 0397). Cut wire 1606 (green) at non-operating
clearance light. Check for 22 to 28 VDC between wire 1606 (green) at driver side body
wire harness and a known good ground.
If 22 to 28 VDC are not present, repair wire 1606 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side body
wire harness (WP 0448).
Step 7.
Turn Off Clearance Lamps (TM 9-2320-347-10). Turn Service Drive Lights Off
(TM 9-2320-347-10). Turn battery disconnect switch to OFF position (WP 0007). Cut
wire 2640 (black) at non-operating clearance light. Check for continuity across wire
2640 (black) from driver side body wire harness to a known good ground.
a.
If there is continuity, replace non-operating clearance light (WP 0349).
b.
If there is no continuity, repair wire 2640 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0448).
0168-4
