DRAFT
TM 5-4210-249-13&P-2
0168
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT4558
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 17.
Turn Off Clearance Lights (TM 9-2320-347-10). Turn Service Drive Lights
Off (TM 9-2320-347-10). Turn battery disconnect switch to OFF position (WP 0007).
Disconnect main wire harness passenger side body wire harness connector. Turn
battery disconnect switch to ON position (WP 0007). Turn Service Drive Lights
On (TM 9-2320-347-10). Turn On Clearance Lights (TM 9-2320-347-10). With a test
lead set, check for 22 to 28 VDC between wire 1606 (green) at main wire harness
connector, terminal J and a known good ground.
a.
If 22 to 28 VDC are present, repair wire 1606 in passenger side body
wire harness if repairable (TM 9-2320-325-14&P), or replace
passenger side body wire harness (WP 0456).
b.
If 22 to 28 VDC are not present, repair wire 1606 in main wire harness
if repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0455).
0168-10
