DRAFT
TM 5-4210-249-13&P-1
0125
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02725
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 8.
Put WINDSHIELD DELUGE switch to off position (WP 0004). Connect hose to
windshield deluge pump inlet (WP 0432). Disconnect pump house wire harness
windshield deluge shutoff valve connector. Put WINDSHIELD DELUGE switch to on
position (WP 0004). With a test lead set, check for 22 to 28 VDC between pump house
wire harness wire 1065 (pink) at windshield deluge shutoff valve connector, terminal A
and a known good ground.
If 22 to 28 VDC are not present, repair wire 1065 in pump house wire
harness if repairable (TM 9-2320-325-14&P), or replace pump house wire
harness (WP 0458).
Step 9.
Put WINDSHIELD DELUGE switch to off position (WP 0004). Turn battery disconnect
switch to OFF position (WP 0007). With a test lead set, check for continuity across
pump house wire harness wire 1640 (black) from windshield deluge shutoff valve
connector, terminal B and a known good ground.
If there is no continuity, repair wire 1640 in pump house harness if repairable
(TM 9-2320-325-14&P), or replace pump house wire harness (WP 0458).
0125-8
