TM 5-4210-233-14&P-2
6-56. OUTPUT YOKE, DUST SHIELD, AND OIL SEAL
This task covers:
a. Removal
c.
Installation
b. Cleaning and inspection d.
Follow-on Maintenance
TOOLS REQUIRED
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Oil, Lubricating (Item 10, Appendix E)
(Appendix B, Section III, Item 1)
Solvent, Dry Cleaning (Item 3, Appendix E)
Oil Seal (Figure 137, Appendix F)
Shop Equipment, Automotive
Maintenance and Repair
EQUIPMENT CONDITION
(Appendix B, Section III, Item 4)
Drive Shaft Removed (see para 5-7.)
Socket, Lock (Appendix B, Section III, Item 71)
Transmission Oil Seal Installer (Appendix B, Section III, Item 70)
Driver Handle (Appendix B, Section III, Item 72)
a. Removal.
NOTE
Torque value must be measured after loosening nut from output yoke. It must take
a minimum of 300 lb-in. (33.90 N m) to turn nut.
(1)
Remove retainer nut (1) from output
shaft (2) with lock socket (Appendix
B, Section III, Item 71).
(2)
Remove output yoke (3) from
output shaft (2).
(3)
Scribe one flat side of nut (1).
(4)
Remove dust shield (4) from rear
cover (5).
(5)
Remove oil seal (6) from rear cover
(5) and discard.
6-314