TM 5-4210-233-14&P-2
6-35. IDLER GEARS - Continued
(6) Remove outer bearing cone (6), inner spacer ring (7), and inner bearing cone (4) from idler gear
assembly (3).
NOTE
Do not remove bearing cups unless they are damaged or loose.
(7) Remove outer bearing cup (8), outer spacer ring (9), and inner bearing cup (1 0) from idler gear
assembly (3).
c.
Cleaning/Inspection.
WARNING
Dry cleaning solvent P-D-680 is potentially dangerous. Avoid
repeated and prolonged breathing of vapors and skin contact
with the liquid. Do not use near open flame, arcing equipment
or other ignition sources. Always wear eye protection and
protective clothing. The flash point of P-D-680 is 100 to 138
deg. F (38 to 59 deg. C).
(1) Clean idler gear and bearing parts with dry cleaning solvent (Item 3, Appendix E).
(2) Inspect bearing for scoring, pitting, or flat spots on rollers or cones.
(3) Inspect bearing cups for scoring, pitting, and dents in bearing surface.
(4) Examine gear teeth for scoring, pitting, and chips.
(5) Replace all damaged parts.
(6) Coat all parts with lubricating oil (Item 10, Appendix E).
6-201
