TM 5-4210-233-14&P-2
6-35. IDLER GEARS - Continued
d. Assembly.
(1) Support idler gear (1), shoulder down, on
bed of press.
(2) Apply lubricating oil (Item 10, Appendix E)
to bearing cup (2) and start inner bearing
cup, numbered side up, into bore of gear
(1).
(3) Press inner bearing cup (2) to seat against
shoulder of gear (1).
(4) Install outer spacer ring (3) on inner
bearing cup
(5) Apply lubricating oil (Item 10, Appendix E) to outer bearing cup (4) and start outer bearing cup,
numbered side down, into bore of idler gear (1).
(6) Press outer bearing cup (4) against outer
spacer ring (3).
(7) Apply lubricating oil (Item 10, Appendix E)
to all parts, place outer bearing cone (5)
numbered side down on bed of press.
(8) Press idler gear hub (6) into outer bearing
cone (5) until bottom of hub (6) is flush with
bottom of cone (5).
(9) Install inner spacer ring (7) on idler gear
hub (6).
(10) Position gap in spacer ring (7) on side
opposite of oil hole in idler gear hub (6).
6-202