TM 5-4210-233-14&P-2
6-31. FLYWHEEL HOUSING AND REAR OIL SEAL - Continued
(34) Apply grease (Item 1, Appendix E) to gasket (41).
(35) Install screw (42), new copper washer (43), access cover (44), and gasket (41).
(36) Install five screws (45) and lockwashers (46).
(37) Tighten screws (42 and 45) to 25 to 30 Ib-ft (34 to 41 N-m).
(38) Tighten four screws (47 and 48) to 25 to 30 lb-ft (34 to 41 N.m).
c.
Follow-on Maintenance.
(1) Install Alternator Drive (see para 6-42).
(2) Install flexplate (see para 6-30).
(3) Install oil pan (see para 5-27).
(4) Install power steering pump (see para 5-26).
(5) Install starting motor (see para 5-12).
(6) Install air compressor (see para 5-17).
(7) Install engine (see para 5-1 1).
6-177