TM 5-4210-233-14&P-2
6-31. FLYWHEEL HOUSING AND REAR OIL SEAL - Continued
(19)
Install four screws (24) and washers (25) in flywheel housing (1).
(20)
Install three new screws (26) and washers (27).
(21)
Coat six screws (28) with sealing compound (Item 2, Appendix E) and install screws and washers
(29).
(22)
Remove lifting eyes and four aligning studs (6) from engine block.
(23)
Install six screws (30) and washers (31
6-174
