TM 5-4210-233-14&P-2
6-31. FLYWHEEL HOUSING AND REAR OIL SEAL - Continued
(24)
Install three screws (32), lockwashers (33), washers (34), and right bank bracket (35).
(25)
Install three screws (36), lockwashers (37), washers (38), and left bank bracket (39).
NOTE
Screws are numbered to show tightening sequence. Screws must
be tightened in order.
(26)
Tighten first six screws in flywheel housing (1) to 90 to 10 Ib-ft (122 to 136 N.m).
(27)
Tighten seventh through ninth screws to 40 to 45 Ib-ft (54 to 61 N.m).
(28)
Turn crankshaft screw (40) clockwise, while other person tightens tenth through twelfth screws to
40 to 45 Ib-ft (54 to 61 N.m).
(29)
Tighten thirteenth through twenty-seventh screws to 25 to 30 Ib-ft (34 to 41 N.m).
6-175