TM 5-4210-233-14&P-2
6-17. WATER NOZZLES - Continued
b. Installation.
CAUTION
Water nozzles must be installed so holes are pointed toward
cylinder for proper cooling water flow to prevent engine
overheating.
NOTE
Repeat steps (1) and (2) to install all water nozzles.
(1) Gently tap water nozzle (1) into water nozzle hole using water nozzle installer (Appendix B,
Section III, Item 33).
(2) Make sure nozzle (1) is recessed 0.004-in (0.1 mm) into face of cylinder head (2).
(3) Pressure test cylinder head (para 6-14).
c.
Follow-on Maintenance.
(1) Install cam followers and push rods (see para 6-22).
(2) Install exhaust valves (see para 6-20).
(3) Install fuel injectors (see para 6-43).
(4) Install exhaust valve bridges (see para 6-24).
(5) Install rocker arms (see para 6-21).
(6) Install cylinder head (see para 6-13).
6-104