TM 5-4210-233-14&P-2
6-14. CYLINDER HEAD REPAIR - Continued
WARNING
Adhesives, solvents, and sealing compounds can burn easily,
can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and
use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap
and water.
NOTE
Coat threads of plugs with pipe thread sealing compound (Item 2, Appendix E) before installation.
(1) Install eight washers (1) and fuel adapters (2) into cylinder head (3). Tighten adapters to 40 to 45
lb-ft (54 to 61 N.m).
(2) Install two plugs (4), plug (5), and plug (6) flush with end of cylinder head (3).
(3) Install elbow (7), elbow (8), tee (9), and connector (10).
(4) Install three plugs (11), plug (12), and plug (13).
(5) Install two elbows (14).
6-94