TM 5-4210-233-14&P-2
6-8. CYLINDER BLOCK- Continued
(13)
Install two 1/4-in. plugs (17) in right side of engine block (5). Tighten plugs to 14 to 16 Ib-ft (19 to 22
Nm).
(14)
Install 1/4-in. drain cock (18).
(15)
Install /4-in fitting (1 9).
(16)
Install elbow (20) in fitting (19).
(17)
Install1-in. plug (21). Tighten plug to 75 to 85 tb-ft (102 to 115 N-m).
(18)
Install reducer bushing (22). Install fitting (23) and elbow (24).
(19)
Install 1/8-in. oil galley plug (25). Tighten plug to10 to 12 lb-ft (14 to 16 Nm).
(20)
Install 3/4-in. oil galley plug (26). Tighten plug to 33 to 37 lb-ft (45 to 50 Nm).
(21)
Install two 1-in. plugs (27) in left side of engine block (5). Tighten plugs to 75 to 85 lb-ft (102to 115
Nm).
(22)
Install 3/4 x 3/8-in. reducer bushing (28).
(23)
Install either starting aid thermostat (29) in reducer bushing (28).
(24)
Install 1/4-in. plugs (30). Tighten plugs to 14 to 16 lb-ft (19 to 22 Nm).
(25)
Install 1/8-in. oil plug (31). Tighten plug to 10 to 12 lb-ft (14to 16 Nm).
(26)
Install reducer bushing (32) and elbow (33).
(27)
Install drain cock (34).
(28)
Install fitting (35), reducer bushing (36), and elbow (37).
(29)
Install starter motor bracket (38), two washers (39), two lockwashers (40), and two screws (41).
6-56
