TM 5-4210-233-14&P-2
6-8. CYLINDER BLOCK - Continued
NOTE
Front face of engine block is shown.
(4)
Install 3/4-in. oil galley plug (8) in front of engine block (5). Tighten plug to 33 to 37 lb-ft (45 to 50
Nm).
(5)
Install 1/2-in. oil galley plug (9).
Tighten plug to 23 to 27 Ib-ft (31 to
37 Nm).
(6)
Install 1/4-in. oil galley plug (10).
Tighten plug to 14 to 16 Ib-ft (19 to
22 Nm). c
(7)
Install 3/8-in. drain cock (11).
(8)
Install 1/4-in. water jacket plug (12).
Tighten plug to 14to 16 Ib-ft (19 to 22
Nm).
(9)
Install 1-1/4 in. water jacket plug (13).
Tighten plug to 95 to 105 Ib-ft (129 to
143 Nm) (10). Install connector (14).
Rear face of engine block is shown.
(11)
Install 1/2-in. oil galley plug (15) in rear end of engine block (5). Tighten plug to 23 to 27 Ib-ft
(31 to 37 Nm).
(12)
Install 3/4-in. oil galley plug (16). Tighten plug to 33 to 37 Ib-ft (45 to 5O Nm).
6-55
