Siren Foot Switch

Figure 43. Engine temperature sending unit,

removal and installation.

c. Installation. Refer to figure 46, and install the

siren light switch on the steering column.

95. Siren Foot Switch

Figure 44. Flasher assembly, removal and

a. Removal. Refer to figure 47, and remove the

installation.

beacon warning light switch from the instrument panel.

b. Cleaning, Inspection, and repair.

96. Pump Gage Panel Warning Light

(1) Clean all parts with a clean cloth

a. Removal. Refer to figure 48, and remove the pump

dampened in an approved cleaning

gage panel warning light from the pump gage panel.

solvent, and dry thoroughly.

b. Cleaning, Inspection, and Repair.

(2) Inspect all parts for damaged or defective

condition.

(1) Clean all parts with a clean cloth

dampened in an approved cleaning

(3) Replace or repair damaged or defective

solvent, and dry thoroughly.

parts as necessary.

(2) Inspect all parts for damaged or defective

c. Installation. Refer to figure 47, and remove the

condition.

siren light switch from the instrument. Panel.

(3) Inspect lamp for cracks, breaks, or burned

out condition.

(4) Replace or repair damaged or defective

parts as necessary.

TAGO 6839A