Figure 46. Beacon warning light switch and siren light switch, removal and installation.

Figure 46. Beacon warning light switch and siren light switch, removal and installation.

b. Cleaning, Inspection, and Repair.

99. Dome Light Switch

(1) Clean all parts with a clean cloth

a. Removal. Refer to figure 49, and remove the

dampened in an approved cleaning

dome light switch from the instrument panel.

solvent, and dry thoroughly.

(2) Inspect all parts for damaged or defective

b. Cleaning, Inspection, and Repair.

condition.

(1) Clean all parts with a clean cloth

(3) Inspect lamp for cracks, breaks, or burned

dampened in an approved cleaning

out condition.

solvent, and dry thoroughly.

(4) Replace or repair damaged or defective

(2) Inspect all parts for damaged or defective

parts as necessary.

condition.

(3) Inspect lamp for cracks, breaks, or burned

c. Installation. Refer to figure 49, and install the

out condition.

pump gage panel light switch on the instrument panel.

(4) Replace or repair damaged or defective

101. Engine Light Switch

parts as necessary.

a. Removal. Refer to figure 49, and remove the

c. Installation. Refer to figure 49, and install the

engine light switch from the instrument panel.

dome light on the instrument panel.

b. Cleaning, Inspection, and Repair.

100. Pump Gage Panel Light Switch

a. Removal. Refer to figure 49, and remove the

pump gage panel light from the instrument panel.