Figure 45. Circuit breakers, removal and installation.

Figure 45. Circuit breakers, removal and installation.

c. Installation. Refer to figure 48, and install the

pump gage panel warning light on the pump gage panel.

98. Dome Light

97. Pump Gage Panel Light

a. Removal. Refer to figure 49, and remove the

a. Removal. Refer to figure 48, and remove the pump

dome light from the special purpose body.

gage panel warning light from the pump gage panel.

b. Cleaning, Inspection, and Repair.

(1) Clean all parts with a clean cloth

dampened in an approved cleaning

solvent, and dry thoroughly.

(2) Inspect all parts for damaged or defective

condition.

(3) Inspect lamp for cracks, breaks, or burned

out condition.

(4) Replace or repair damaged or defective

parts as necessary.

c. Installation. Refer to figure 49, and install the

dome light on the special purpose body.

TAGO 6939A