Figure 42. Engine oil pressure sending unit, removal and installation.

Figure 42. Engine oil pressure sending unit, removal and installation.

(2) Inspect all parts for damaged or defective

b. Cleaning, Inspection, and repair.

condition.

(1) Clean all parts with a clean cloth

(3) Replace or repair damaged or defective

dampened in an approved cleaning

parts as necessary.

solvent, and dry thoroughly.

(2) Inspect all parts for damaged or defective

c. Installation. Refer to figure 46, and remove the

condition.

siren light switch from the instrument. Panel.

(3) Replace or repair damaged or defective

94. Siren Hand Switch

parts as necessary.

a. Removal. Refer to figure 46, and remove the

c. Installation. Refer to figure 46, and remove the

beacon warning light switch from the instrument panel.

siren light switch from the instrument panel.

b. Cleaning, Inspection, and repair.

93. Turn Signal Switch

(1) Clean all parts with a clean cloth

a. Removal. Refer to figure 46, and remove the

dampened in an approved cleaning

beacon warning light switch from the instrument panel.

solvent, and dry thoroughly.

(2) Inspect all parts for damaged or defective

b. Cleaning, Inspection, and repair.

condition.

(1) Clean all parts with a clean cloth

(3) Replace or repair damaged or defective

dampened in an approved cleaning

parts as necessary.

solvent, and dry thoroughly.

TAGO 6839A