DRAFT
TM 5-4210-249-13&P-4
0606
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00958
NOTE
Firmly insert a flat blade screwdriver in square hole to open spring in terminal. When fully
inserted, screwdriver will lock in place and wire can be removed from terminal.
53. Install heat trace braid (7) to terminal (6) in location noted.
54. Install heat trace cable bus wires (5) to terminal (6) in location noted.
55. Install rubber seal (3) and cover (2) on junction box (4) with four screws (1).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0606-17/(18 blank)