DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
WIRE ROPE REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 50
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Engine OFF (TM 9-2320-347-10)
Lockwasher (1)
Wheels chocked (TM 9-2320-347-10)
Lockwasher (1)
REMOVAL
TFFT0148
NOTE
Perform Steps (1) through (5) to remove wire rope from driver side main inlet cap.
1.
Remove screw (1), lockwasher (2), washer (3), and clip (4) from pump house panel (5). Discard lockwasher.
2.
Remove ring (6) and wire rope (7) from cap (8) and vehicle.
3.
Remove clip (4) from S-hook (9).
4.
Remove S-hook (9) from wire rope (7).
5.
Remove two swaging sleeves (10) from wire rope (7).
0563-1
