DRAFT
TM 5-4210-249-13&P-3
0563
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT0149
NOTE
Perform Steps (6) through (10) to remove wire rope from No. 1 driver side discharge cap,
No. 2 driver side discharge cap, No. 3 passenger side discharge cap, No. 4 passenger
side discharge, or passenger side auxiliary inlet cap.
6.
Remove screw (11), lockwasher (12), washer (13), and clip (14) from pump house panel (15). Discard
lockwasher.
7.
Remove S-hook (16) from cap (17).
8.
Remove clip (14) from S-hook (18).
9.
Remove two S-hooks (16) and (18) from wire rope (19).
10. Remove two swaging sleeves (20) from wire rope (19).
END OF TASK
INSTALLATION
NOTE
Perform Steps (1) through (6) to install wire rope on No. 1 driver side discharge cap, No. 2
driver side discharge cap, No. 3 passenger side discharge cap, or passenger side
auxiliary inlet cap.
Wire rope needs to run through one side of swaging sleeve then back through other side
of swaging sleeve.
1.
Install two swaging sleeves (20) on wire rope (19).
2.
Crimp two swaging sleeves (20).
0563-2