DRAFT
TM 5-4210-249-13&P-3
0563
3.
Install two S-hooks (16) and (18) on wire rope (19).
4.
Install clip (14) on S-hook (18).
5.
Install S-hook (16) on cap (17).
6.
Install clip (14) on pump house panel (15) with washer (13), lockwasher (12), and screw (11).
TFFT0148
NOTE
Perform Steps (7) through (12) to install wire rope on driver side main inlet cap.
Wire rope needs to run through one side of swaging sleeve then back through other side
of swaging sleeve.
7.
Install two swaging sleeves (10) on wire rope (7).
8.
Crimp two swaging sleeves (10).
9.
Install S-hook (9) on wire rope (7).
10. Install clip (4) on S-hook (9).
11. Install wire rope (7) on cap (8) with ring (6).
12. Install clip (4) on pump house panel (5) with washer (3), lockwasher (2), and screw (1).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0563-3/(4 blank)