DRAFT
TM 5-4210-249-13&P-3
0527
NOZZLE TIP BRACKET REMOVAL
TFFT02094
NOTE
Both nozzle tip brackets are removed the same way.
1.
Remove four screws (1) and plate (2) from compartment (3).
2.
Remove three nuts (4), screws (5), and bracket (6) from plate (2).
END OF TASK
NOZZLE TIP BRACKET INSTALLATION
1.
Install bracket (6) on plate (2) with three screws (5) and nuts (4).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Both nozzle tip brackets are installed the same way.
2.
Apply thread lock adhesive on threads of four screws (1).
3.
Install plate (2) in compartment (3) with four screws (1).
END OF TASK
0527-18