DRAFT
TM 5-4210-249-13&P-3
0527
PIKE HANDLE BRACKET REMOVAL
TFFT01753
NOTE
Both brackets are removed the same way.
Remove two screws (1), lockwashers (2), washers (3), and bracket (4) from compartment (5). Discard
lockwashers.
END OF TASK
PIKE HANDLE BRACKET INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Both brackets are installed the same way.
1.
Apply lock adhesive on threads of two screws (1).
2.
Install bracket (4) in compartment (5) with four washers (3), lockwashers (2), and screws (1).
END OF TASK
0527-23
