DRAFT
TM 5-4210-249-13&P-3
0527
BASE BRACKET INSTALLATION
TFFT01759
1.
Install two loop brackets (7) on bracket (2) with four screws (6) and nuts (5).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
All base brackets are installed the same way. Circular saw base bracket shown.
Number of screws may vary.
2.
Apply thread lock adhesive on threads of four screws (3).
3.
Install bracket (2) in compartment (4) with four screws (3).
4.
Clean mating surface of Teflon tape and bracket (2) with mineral spirits.
5.
Install Teflon tape (1) on bracket (2).
END OF TASK
0527-14
