DRAFT
TM 5-4210-249-13&P-3
0527
FIRE EXTINGUISHER BRACKET REMOVAL
TFFT02091
NOTE
Both fire extinguisher brackets are removed the same way.
Remove four screws (1) and bracket (2) from compartment (3).
END OF TASK
FIRE EXTINGUISHER BRACKET INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Both fire extinguisher brackets are installed the same way.
1.
Apply thread lock adhesive on threads of four screws (1).
2.
Install bracket (2) in compartment (3) with four screws (1).
END OF TASK
0527-15