DRAFT
TM 5-4210-249-13&P-3
0527
BASE BRACKET REMOVAL
TFFT01759
NOTE
All base brackets are removed the same way. Circular saw base bracket shown.
Number of screws may vary.
Perform Step (1) if Teflon tape is covering mounting screws.
1.
Remove Teflon tape (1) from bracket (2).
2.
Remove four screws (3) and bracket (2) from compartment (4).
3.
Remove four nuts (5), screws (6), and two loop brackets (7) from bracket (2).
END OF TASK
0527-13