DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
CREW CAB DOOR WINDOW/REGULATOR REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 119
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Crew cab outer door handle removed (WP 0503)
Lockwasher (6)
Locknut (2)
REMOVAL
TFFT02261
NOTE
Left side and right side windows and regulators are replaced the same way. Left side is
shown.
1.
Remove two screws (1) and lockwashers (2) from bottom of regulator (3). Discard lockwashers.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 72
Window must be supported when pulling regulator away from window. Failure to
comply may result in injury to personnel and damage to equipment.
2.
Pull regulator (3) away from window (4).
0506-1
