DRAFT
TM 5-4210-249-13&P-3
0507
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01305
4.
Remove two screws (13) and washers (14) from door panel (15).
5.
Remove 14 screws (16) and washers (17) from door panel (15).
6.
Remove four screws (18) and door panel (15) from door (4).
NOTE
Perform Step (7) if rubber strip is damaged.
7.
Remove rubber strip (19) from door panel (15).
END OF TASK
INSTALLATION
NOTE
Perform Step (1) if rubber strip was removed.
Ensure door and door panel mounting surfaces are clean prior to installing rubber strip.
Left and right side door panels are installed the same way. Left side shown.
1.
Install rubber strip (19) on door panel (15).
2.
Install door panel (15) on door (4) with four screws (18).
3.
Install 14 washers (17) and screws (16) on door panel (15).
4.
Install two washers (14) and screws (13) on door panel (15).
0507-2