DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE WIRE HARNESS REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 101
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Water pump engine radiator removed (WP 0481)
Tags, Identification (WP 0625, Item 51)
Crew cab access panels removed (WP 0499)
Pump house panels O and Q removed (WP 0540)
Ties, Cable, Plastic (WP 0625, Item 58)
WATER PUMP ENGINE WIRE HARNESS REMOVAL
TFFT03354
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Note routing of pump house engine wire harness prior to removal to ensure proper
installation.
Note position and remove cable ties, split loom, and cushion clips as required.
Starter solenoid is accessed through pump house panel G.
1.
Remove screw (1), retaining clip (2), and wire (3) from starter solenoid (4).
0464-1