DRAFT
TM 5-4210-249-13&P-3
0464
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03359
9.
Disconnect water pump engine wire harness connector (26) from oil pressure sending unit (27).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03360
NOTE
Removing glow plug feed wires and glow plug wires allows for easier removal of pump
engine wire harness.
Second jumperwire is located behind glow plug wires. Note position of jumperwires prior
to removal to ensure proper installation.
10. Remove two caps (28), nuts (29), jumperwires (30), and six glow plug wires (31) from two studs (32).
0464-4