DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
PUMP OPERATOR'S PANEL WIRE HARNESS REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 96
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Crew cab access panels removed (WP 0499)
Compound, Sealing (WP 0625, Item 17)
Pump house panel Q removed (WP 0540)
Tags, Identification (WP 0625, Item 51)
Passenger side auxiliary inlet and driver side
Ties, Cable, Plastic (WP 0625, Item 58)
main inlet bleeder valves removed (WP 0278)
Lockwasher (51)
Lockwasher (1)
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03283
CAUTION
Care must be taken to ensure electronic parts do not come in contact with other
parts of vehicle. Damage to equipment may result.
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Note routing of pump operator's panel wire harness to ensure proper installation.
Note position and remove cable ties, split looms, and cushion clips as required.
An assistant may be required.
1.
Remove two screws (1), lockwashers (2), wire 2773 (3), and wire 2788 (4) from DRIVER MAIN INLET
PRIMER switch (5). Discard lockwashers.
0459-1