DRAFT
TM 5-4210-249-13&P-3
0424
INSTALLATION
TFFT04578
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
CAUTION
Use sealing compound sparingly only on pipe threads. Do not apply compound to
hose connections. Damage to equipment may result.
NOTE
Exhaust fitting will be adjusted at end of installation procedure.
1.
Apply sealing compound to threads of two fittings (16) and (17), tee (20), and exhaust fitting (24).
2.
Install exhaust fitting (24), tee (20), and two fittings (17) and (16) on roof turret control valve (7).
3.
Install roof turret control valve (7) on junction box (4) with two screws (23), four washers (22), and two
locknuts (21).
4.
Install two air lines (19) and (18) on tee (20).
5.
Install two air lines (15) and (14) on fittings (17) and (16).
0424-4
